Engraved Wooden Bird Feeder Table

From: £450.00

Reviews

Be the first to review “Engraved Wooden Bird Feeder Table”

There are no reviews yet.

Finish: Untreated, Superior Danish Oil or Diamond Coating

Aftercare: Product maintenance is very important. If you have chosen your product to be left untreated, your product will fade to a pale silver in time. We recommend a pressure wash or a sand once a year to remove any moss or unwanted mess on the timber and then treat with an exterior oil to slow down decay.

Danish Oil – If you have chosen Danish oil we recommend you continue to treat your product with Danish oil or similar timber treatment oil to protect the timber and stop it drying out. This will also help to prevent staining, discolouration, cracking and warping.

Dimond Coating – If you have chosen Dimond Coating, top up kits can be purchased on our website or over the phone. We would recommend you treat your product once a year minimum. Twice a year if you want to maintain full protection.

About Timber: Natural timber will always want to move. It’s going to expand and shrink as the temperature and humidity changes in your home and outside, rest assured it won’t change drastically. Small hairline splits may occur as your product ages, this is completely normal and is regarded as part of the timbers natural beauty. As the seasons change you may see some movement in your product, again this is completely normal.

Air-dried oak: Your product has been made using Air-dried timber. This is has been seasoned for outdoor conditions. Do not keep exterior products indoors.

If you need any help or advise on how to maintain your product please contact us or consult your care guide.

Design & Made: Handmade to order in the UK

Material: Made from solid English Oak

Dimensions:

Bird Feeding Bowl – 7cm thick x 30cm diameter

Post – 10cm diameter x 1Metre tall

Bird Feeding Bowl – 7cm thick x 30cm diameter

Post – 10cm diameter x 1Metre tall

Product Description: Engraved Wooden Bird Feeder Table

This engraved wooden bird feeder table is an exquisite feature for the garden. An absolutely stunning piece which will make a real feature in any garden, stood in a glass lawn or set within a flowerbed.

This engraved wooden garden bird feeder table is fresh from our Hampshire workshop. Something a little different from what you have probably seen before. This is a solid oak, sturdy, long-lasting, eye-catching bird feeder for your garden.

Making our Oak Bird Feeders:

Constructed from 100% solid English Oak by hand, the feeder is made using a 1 meter long, 120mm diameter round post with a large, very thick carved round feeding tabletop. The post is a traditional beam-style post, the same as used in high quality fencing. The post is rustic in appearance meaning there will be splits and cracks along its sides.

These handmade wooden bird feeders are a real statement in your garden. They look fantastic on display simply by themselves. Perhaps with some lavender planted around the base to finish the look or amongst the flowers in a flowerbed. Our Oak bird feeders are simply stunning.

Personalise your bird feeder:

Our beautiful wooden bird feeders can be personalised with words or lettering of your choice around the edge of the feeder table – choose to have either 20 or 40 characters in total. Perfect for names, dates, a favourite poem, quote or saying. They will make wonderful wedding gifts, 5th wedding anniversary gifts, leavers gifts or for any other very special occasions.

These oak bird tables will also make wonderful garden memorials. The bird table can be engraved with a name and a date as well as a message if required. Please contact us if you need any help.

You can also add carved symbols like hearts, stars and other engraved motifs like zodiac signs. Take a look at the options available to you for your personalised bird feeder – Engraving options.

Finish:

As with everything we do here at Make Me Something Special, we have spent the time researching and sourcing the perfect materials available. Each engraved oak bird feeder is handmade from one piece of Air Dried Superior Grade English Oak. This Timber is perfectly seasoned and adjusted for outdoor conditions. You can choose to leave your board feeder untreated, finished in Superior Danish Oil or our low maintenance Diamond Coating finish. If you choose untreated your product will weather to a pale silver more quickly. Danish Oil will not only treat the timber but also bring out the timbers natural colour. This has a UV filter to protect the timber but it does require regular upkeep. 2 – 4 times a year to keep it looking its best. Diamond Coating is more glossy but a lot more harder wearing and only requires a top up once a year, however this depend on the weather and where the product is placed. We would recommend twice a year if you want full protection. Top up kits can be ordered over the phone or on our website – see here. 

Dimensions & Character Quantities:

Feeder Table Top:

7cm x 30cm diameter  (3” x 12”)

Post:

10cm diameter x 1 Metre long  (4” x 40”)

Estimated Delivery Time:

10 – 14 working days. Please be aware this can change daily. If you require an item to be made by a specific date please contact us.

Please Note: 

All of our engraved oak bird feeders are made to order. All engravings are in capitals. For lower case lettering, this can be requested at the time of order. Please add this to the note section at checkout or you can contact us via email or phone. All sizes are approximate. The post is a traditional beam-style post, it will contain splits and cracks along its sides.

Read more
Engraving Trigger

Personalised Engraving

Across our range

International Delivery

Delivery charges may apply

Live Chat Support

Fast service support

Lets stay in touch

Sign up for our newsletter